Skip to main content

4 Brothers Bottle Caps

I've been home brewing for a few years now.  I've bottled my beer using a variety of different bottle types, from bombers to plastic bottles with screw-on caps.  I've always treated bottles and caps like a basic commodity.  Bottles are more or less the same, and caps seemed simple enough objects that they didn't require a lot of thought.

With that mindset, when a homebrew site offered 4 Brothers bottle caps at a huge discount (around $1.99 for 144), I jumped at the chance and bought about 600 of them.  It's proven to be one of the worst purchases of the year.  (I am not mentioning the site because everything else I've ever bought from them has been excellent and I don't view this purchase as a failure on their part.  There are reviews on the site of these caps. One of them does mention having trouble capping some bottles with them.

I brewed a Belgian Tripel earlier in the year, which fermented unusually fast and completely.  I had just gotten these caps and decided to use them.  When I opened the first of the bottles, it was completely flat. So was the second, the third, etc.  Since I had used the last of some of my other caps on that batch, I didn't blame the 4 Brothers caps for the problem because other caps from other brands showed the same lack of carbonation.  I think the yeast just flocculated out or went dormant on that batch.

The next batch I used the caps on was an English Bitter.  During the bottling process, several caps were mangled, didn't crimp completely, etc. This was something I hadn't seen before.  I suspected that my capper was wearing out. I completed the batch and bought a replacement capper, and later a bench capper.

Last night, I began bottling a new Belgian Tripel.  The bench capper had an annoying tendency to hold on to the bottles after capping and lift them up, so I set it aside. The plastic "wing" style cappers (I now had three) kept having problems with the 4 Brothers caps, too.  After having five or six "reject" caps in about 20 bottles, I knew something was wrong.  When I grabbed the cap on one of the finished bottles, I found that I could actually TWIST it easily on the bottle. It wasn't sealed properly.  The same was true of several of the others.  Now I knew the problem was the 4 Brothers caps.

I sealed everything up and drove to a local homebrew shop, where I bought two packages of LD Carlson caps.  I uncapped all the bottles I'd just done and re-capped using these new caps.  I didn't have a single mangled reject and every bottle sealed easily.  None of the caps were loose this time.

I'm going to stop short of saying these are bad caps or that they are defective somehow.  It's entirely possible that I unknowingly ordered large 29mm caps.  It's possible I just got a bad batch of them.  It's hard to say, and at this point it doesn't matter.  The bottom line is that these nearly ruined two batches of homebrew for me, and possibly contributed to issues with a third batch.  I don't plan to ever buy or use these again, and I've already tossed the one I purchased.

The caps seem to be the same size as the LD Carlson caps that worked fine.  For example, here is a side-by-side photo of the top of each cap:

4 Brothers cap on the left, LD Carlson on the right
And here is the bottom:

4 Brothers cap on the left, LD Carlson on the right
The rubber seals underneath are different.  The 4 Brothers caps seem to have a larger "gasket" ring than the LD Carlson caps, but otherwise look the same.

Holding them together in my hand, I can't tell that either is larger or dramatically different from the other, so I can't account for the difficulty I had using the 4 Brothers caps.

The lesson I'm taking away from this experience is that when purchasing a new brand or style of bottle caps, I should only use the new caps to do a small percentage of the batch of bottles.  The rest should be done with a "known good" brand.  That way, if the new caps are defective, they'll only ruin a few bottles and not my entire batch.  I'll also be paying closer attention to my capping efforts and cappers to make sure the bottles seem to be sealing properly.
Labels:

Comments

  1. mad capperFebruary 10, 2016 at 4:51 PM

    Had 20 that I had to recap due to the bottle cap sealing crooked.

    ReplyDelete

Post a Comment

Note that comments to this blog are moderated in order to minimize spam comments and things that might be offensive to readers.

Popular posts from this blog

2021 Batch 16/17 - Horseman's Pumpkin Ale Kit from Great Fermentations

Although there are a few pumpkin spice ales on the market that I enjoy (Hoppin' Frog's Double Pumpkin, Samuel Adams Fat Jack, and Heavy Seas Great'r Pumpkin come to mind first), I've yet to brew a pumpkin spice ale that I have been happy with.  Either I didn't feel like the base beer was quite right, or the spice mix was too "something" (insert random pie spice there) forward, it was too hop-forward, or it was wrong in some other way.  This year, I decided to try the kit from Great Fermentations in Indiana to see if I liked that any better than previous brews. Ingredients 9 pounds 2-row Brewer's Malt 1 pound Munich Malt 8 ounces Crystal 40L Malt 15 ounces Canned Pumpkin (not included in kit) 1/4 tsp. Brewtan B (my addition to kit) 1 ounce Glacier Hops 1/2 tsp. Brewtan B (my addition to kit) 1 tsp. Irish Moss (15 min.) 0.5 tsp. Ground Cinnamon (not included in kit) 0.5 tsp. Vanilla extract (not included in kit) 0.5 tsp. Pumpkin Pie Spice (not included i...
Post a Comment
Read more

2022 Batch 01 - St. Gambrinus Spiced Holiday Ale (Kit)

I purchased a St. Gambrinus Spiced Holiday Ale Kit from Great Fermentations in Indianapolis a few weeks ago and decided to get it made today... a tad late for the holidays, but it will give me a good idea if I like the recipe for next Christmas. The kit basically comes as a bag of crushed grain with a packet of Northern Brewer hops.  You supply your own spices and order yeast separately. Ingredients 8.5 pounds Two-Row Brewer's Malt 2 pounds Munich Dark Malt 1 pound Honey Malt 8 ounces Simpsons Dark Crystal Malt 0.5 ounces Northern Brewer hops (60 min.) 0.5 ounces Northern Brewer hops (30 min.) 1 package White Labs Edinburgh Scottish Ale yeast 1 tsp. Irish Moss (15 min.) 0.5 oz. Bitter Orange Peel (10 min.) 2 cinnamon sticks (I used 3) (10 min.) 0.5 tsp. Ground Ginger (10 min.) 0.25 tsp. Allspice (secondary) 0.25 oz. Ground Cardamom (secondary) 0.25 oz. Ground Cinnamon (secondary) 1 Tbsp. pH 5.2 Stabilizer added to mash after grain 6.8 gallons of RO water, treated with: 3 grams Gyps...
Post a Comment
Read more

2022 Batch 02 - Pecan Brandy Mead

I watched an episode of Moonshiners: Master Distiller   late in 2020 where one of the contestants made a Pecan Brandy that he (and the judges) described as being very tasty, like drinking a pecan pie.  I thought that sounded good, and although distilling it into brandy would not be a legal option for me, turning it into a mead would be quite possible and might be good. The recipe as described on the show was pretty simple... honey, water, yeast, and pecans. Ingredients 12 pounds of Wildflower Honey 2 pounds of Pecans, crushed and ground 4 gallons of water, treated with some gypsum 1 tsp. yeast nutrient 1 package of Premier Des Cotes champagne yeast Batch Size: 5.0 gallons (actual and estimated) Original Gravity:  1.090 (actual and estimated) Final Gravity:   0.984 (estimated) Brewing Instructions Bring water to a boil and sterilize wort chiller. Add half the pecans in a muslin bag.  Add the other half, in a different muslin bag, to the fermenter. Gradually add ...
Post a Comment
Read more