Skip to main content

Can adding amalyse help make better beer?

Recently, I saw a recipe for a 21% ABV all-grain brew.  The recipe calls for a whopping 31 pounds of grain and four ounces of hops, along with enzymes to help push the mash along.  The enzyme (Beano) specified in the recipe is measured in terms of tablets.  I wanted to know how to use Amylase instead, since I had that on hand.

Amylase is an enzyme that breaks down two components of starch and complex carbohydrates to form maltose and glucose sugars.  Amylase improves conversion efficiency and time by splitting barley starch molecules into partially-fermentable dextrins and maltose.  Given enough time, amylase can dismantle the dextrins to maltose, glucose, and smaller dextrins.  When fermentation begins, yeast will break the sucrose into glucose and fructose.  It then consumes (more or less in order), the glucose, the fructose, the maltose, and finally the maltotriose.  The dextrins will not be consumed.  By helping to break the starches into maltose, glucose, and dextrins, Amylase makes more of the starch in the grain consumable by the yeast (resulting in a more complete fermentation and a higher alcohol content to the beer).

So, how do we use Amylase properly?  I wasn't sure, so I did some digging.

Here's what I learned:
  • Amylase can be added to a stuck fermentation to push it along, but it's best suited to be added during the mash.
     
  • Enzymes in play during mashing will stop working at 168 degrees F (Fahrenheit), and this includes Amylase.  Amylase works best at 147-153 degrees F.
     
  • The recommended amount is 1/2 ounce for each 10 pounds of grain in the mash.
     
  • If your fermentation is stuck, and/or your recipe included a lot of adjunct sugars, adding amylase to the fermenter (dissolved in sterilized and cooled water) can "unstick" it.
The recipe I'm considering brewing (a modified and smaller batch of the 21% beer above) has 8 pounds of grain in it.  That's close enough to 10 pounds that I'm planning to put a half-ounce of Amylase in my mash water and use the iodine test to make sure it's all converted.  I'm also going to add yeast nutrients in the boil and will oxygenate each incremental wort addition in the fermenter to keep the yeast happy.  Hopefully that, combined with feeding the yeast the full batch of wort a little at time, will yield a brew in the 21% or higher ABV range.

More on that if and when I decide to brew this thing!



Labels:

Comments

Post a Comment

Note that comments to this blog are moderated in order to minimize spam comments and things that might be offensive to readers.

Popular posts from this blog

2021 Batch 16/17 - Horseman's Pumpkin Ale Kit from Great Fermentations

Although there are a few pumpkin spice ales on the market that I enjoy (Hoppin' Frog's Double Pumpkin, Samuel Adams Fat Jack, and Heavy Seas Great'r Pumpkin come to mind first), I've yet to brew a pumpkin spice ale that I have been happy with.  Either I didn't feel like the base beer was quite right, or the spice mix was too "something" (insert random pie spice there) forward, it was too hop-forward, or it was wrong in some other way.  This year, I decided to try the kit from Great Fermentations in Indiana to see if I liked that any better than previous brews. Ingredients 9 pounds 2-row Brewer's Malt 1 pound Munich Malt 8 ounces Crystal 40L Malt 15 ounces Canned Pumpkin (not included in kit) 1/4 tsp. Brewtan B (my addition to kit) 1 ounce Glacier Hops 1/2 tsp. Brewtan B (my addition to kit) 1 tsp. Irish Moss (15 min.) 0.5 tsp. Ground Cinnamon (not included in kit) 0.5 tsp. Vanilla extract (not included in kit) 0.5 tsp. Pumpkin Pie Spice (not included i...
Post a Comment
Read more

2022 Batch 01 - St. Gambrinus Spiced Holiday Ale (Kit)

I purchased a St. Gambrinus Spiced Holiday Ale Kit from Great Fermentations in Indianapolis a few weeks ago and decided to get it made today... a tad late for the holidays, but it will give me a good idea if I like the recipe for next Christmas. The kit basically comes as a bag of crushed grain with a packet of Northern Brewer hops.  You supply your own spices and order yeast separately. Ingredients 8.5 pounds Two-Row Brewer's Malt 2 pounds Munich Dark Malt 1 pound Honey Malt 8 ounces Simpsons Dark Crystal Malt 0.5 ounces Northern Brewer hops (60 min.) 0.5 ounces Northern Brewer hops (30 min.) 1 package White Labs Edinburgh Scottish Ale yeast 1 tsp. Irish Moss (15 min.) 0.5 oz. Bitter Orange Peel (10 min.) 2 cinnamon sticks (I used 3) (10 min.) 0.5 tsp. Ground Ginger (10 min.) 0.25 tsp. Allspice (secondary) 0.25 oz. Ground Cardamom (secondary) 0.25 oz. Ground Cinnamon (secondary) 1 Tbsp. pH 5.2 Stabilizer added to mash after grain 6.8 gallons of RO water, treated with: 3 grams Gyps...
Post a Comment
Read more

What I Learned About Brewing in 2021

Last year, I brewed 20 batches of adult beverages (primarily beer and test mashes). In no particular order, here are things I learned during the year: The COVID-19 pandemic left me with more time at home to brew, but at the same time made doing so a bit less enjoyable.  Why?  Because I could not share my homebrew with family and friends as easily as I could pre-pandemic.  Without feedback from my friends about what they did (and didn't) like in my beer, I was less motivated to brew and less able to improve my beer than in prior years. The pump on The Grainfather has a life span (in my experience) of around 200 brews before it dies, and the "official" replacement is way too expensive to suit me (like $190).  I was able to replace it with a pump from Amazon for about $70 that seems to flow much better and stronger than the official pump.  It took some redneck-looking jerry-rigging to fix it, but the system flows better now and I can continue brewing. On a personal...
Post a Comment
Read more