Begin Brewing!

As I've mentioned in earlier posts, my Brewie+ quit working properly on July 12.  I reached out to the manufacturer and was told that new wiring would be shipped to me for installation.  Unfortunately, it's now two months later and there is no wiring. There are also rumors online of the manufacturer going out of business, supported by the fact that their web site seems to go online and offline randomly and (last time I tried) I could not submit trouble tickets or send an email inquiring about the status of my repair part order. Fearing the worst, I ordered some high-temperature wire, high temperature connectors, high-temperature silicone tape, and thermal switches of the kind used in the Brewie and Brewie+.  Earlier today, a friend and I created replacement wiring for the Brewie+ heating element and thermal switch.  We also removed the failed thermal switch and replaced it with a new one. After reassembling the Brewie+, it booted up fine and looked to be working....

The last time I brewed with my Brewie+ was July 12, 2019.  The machine failed during that brew, leaving wort slowly cooling in the boil kettle.  I saved the batch by pumping it to another kettle and finishing it out there, but the Brewie itself was out of commission.  I contacted the manufacturer that evening for help. Two days later, I was told that parts were on the way to repair it.  It's now September 7, and those parts haven't arrived. In the meantime, there are strong indications that the company making the Brewie has gone out of business.  I'm hopeful those are just rumors, but there are a number of facts that suggest otherwise. Although their web site is still active, their tech support system reports "Account suspended" if you try to post a case or ask a question.  Their support email address, if you email it, comes back as non-existent.  Right now, eBay is filled with a number of broken "customer return" systems that you can purchase inexpe...

I've been brewing now for at least 7 years. Over that time, I've brewed well over 100 batches and used several different configurations of equipment. Most of the batches were brewed with iMake's The Grainfather all-in-one system. Many were brewed with PicoBrew's Zymatic.  For the last 8 months, I've brewed exclusively with the Brewie+.  For home brewers considering purchasing a Grainfather, Zymatic, or Brewie+, I thought it might be worthwhile to share some thoughts and experiences since I've been fortunate enough to use all three. Let's start with a quick comparison of high-level features: iMake's The Grainfather: Uses 110 volt (for the US model) electrical outlets Brews up 8 gallons in a single batch Has a grain bill limit of X pounds Provides good temperature control through the mash With the "Connect" controller, you can control temperature and pump activation remotely with their app, provided you are in Bluetooth range Handle...